TriMark 22272-03, Installation Instructions Manual

Page: 19 / 28

16
Troubleshooting
Problem Description Possible Solution
e- FOB Hints
Button press does not provide
correct operation
Verify power to the I/O module and RF
receiver.
Re-teach the FOB transmitter to the
receiver. Ensure that only Lock button is
pressed while in learn mode.
No operation or intermittent
operation
Mount RF receiver away from enclosed
metal areas and fully extend antenna.
Check FOB transmitter battery voltage.
Batteries need to be changed every 1-2
years depending on usage.
Alarm mode starts when
powered up
Press Unlock button of FOB transmitter.
One particular e- FOB function
does not work
Check wire connection of affected
function at RF module, wiring harness,
and I/O module.
Zone 6 activated inadvertently
Verify that Zone 6 is not connected to
the cargo button on the FOB transmitter.
The cargo button can activate both
outputs.
e- PAD Hints
No response with button press
Verify power to the I/O module.
Verify that keypad cable is connected.
(rest of system will function)
Verify that code has not been changed.
Reassign keypad with instructions on
starting on page 14.
Confirm use of an access code, not the
authority code.
Key FOB works correctly,
keypad beeps, but no output
Cycle power to I/O module.
Unexpected, secure operation
occurs Verify DIP switches are set to correct
configuration setting.
Access code is not recognized