Appendix A: Mounting e-
ASK
Components
Contact Tri
Mark
for specific mounting details, such as drawings,
placement suggestions, mounting hardware, etc.
General Mounting Guidelines:
•
The RF receiver should be placed in an interior location that
does not shield RF signals. You may need to try multiple
locations to optimize reception. The antennae must be left fully
extended and exposed. Minimize shielding from metal
enclosures.
•
Top surface of the I/O module has features that can be self-
tapped with a #8-32 fastener. Fasteners should not be longer
than 0.5 inches in thread length. Also other components, wiring
holders, etc. can be mounted with these features.
•
Mount
e-
PAD
to vehicle. Plug the 4-pin connector into the J3 or
J4 connector on the I/O module.
RF Receiver Module
I/O Module
I
Summary of Contents for 22272-03
Page 28: ...UM15 22272 03 11 06 1...
