TriMark 22272-03, Installation Instructions Manual

Page: 17 / 28

Teaching Keypad New Authority / Access
Codes
When you assign a new authority code, you delete the existing
authority code and all access codes.
Note: The authority code you assign following these instructions also
becomes an access code saved to the (1 / 2) or (1) button.
1. Cycle (short then open) the S1 pins of the I/O module learn
connector (Appendix B, page IV). There will be three-second
beep.
2. Enter a new five-digit code—this will be your access and
authority code.
3. Enter the new code again.
4. The existing code will only be erased if a new code is
assigned.
5. The code is stored in position one.
Important: Authority and access codes should not be the same. If
someone figures out an access code and discovers it to be an
authority code as well, they can then create their own access code
and gain entrance to your vehicle.
Once resetting the keypad, your next step should be to create a new
access code and store it in position one so as to ensure the access
code is no longer the same as the authority code.
Notes:
•
The authority code is to be controlled by individuals (owners
of vehicle, fleet manager, etc.) who manage the distribution of
access codes to vehicle users.
•
The authority code should be changed when the vehicle is
sold.
•
The authority code does not enable secure functions (lock/
unlock doors, etc.)—it is only used to assign access codes.
The following area can be used to document the authority code:
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
Authority Code
14