FUTABA 7PX User Manual Download | Manualshive

Page: 1 / 192

background image

2

Thank you for purchasing a Futaba 7PX-2.4GHz system.

Before use, read this manual carefully in order to use it safely.

After reading this manual, store it in a safe place.

IN NORTH AMERICA

Please feel free to contact the Futaba Service Center for assistance with operation and programming. Please

be sure to regularly visit the 7PX Frequently Asked Questions web site at www.futaba-rc.com/faq/. This page

includes extensive programming, use, set up and safety information on the 7PX radio system and is updated

regularly. Any technical updates and US manual corrections will be available on this web page. If you do not

find the answers to your questions there, please see the end of our F.A.Q. area for information on contacting

us via e-mail for the most rapid and convenient response.
Don’t you have Internet access? Internet access is available at no charge at most public libraries, schools, and

other public resources. We find internet support to be a fabulous reference for many modelers as items can be

printed and saved for future reference, and can be accessed at any hour of the day, night, weekend or holiday.

If you do not wish to access the internet for information, however, don’t worry. Our support teams are avail-

able Monday through Friday 8-5 Central time to assist you.

Application, Export, and Modification

1. This product may be used for models only. It is not intended for use in any application other than the con-

trol of models for hobby and recreational purposes.
2. Exportation precautions:
(a) When this product is exported from the country of manufacture, its use is to be approved by the laws gov-

erning the country of destination for devices that emit radio frequencies. If this product is then re-exported

to other countries, it may be subject to restrictions on such export. Prior approval of the appropriate govern-

ment authorities may be required. If you have purchased this product from an exporter outside your country,

and not the authorized Futaba distributor in your country, please contact the seller immediately to determine

if such export regulations have been met.
(b) Use of this product with other than models may be restricted by Export and Trade Control Regulations,

and an application for export approval must be submitted.

3. Modification, adjustment, and replacement of parts: Futaba is not responsible for unauthorized modifica

-

tion, adjustment, and replacement of parts on this product. Any such changes may void the warranty.

OUTSIDE NORTH AMERICA

Please contact the Futaba importer in your region of the world to assist you with any questions, problems or

service needs. Please recognize that all information in this manual, and all support availability, is based upon

the systems sold in North America only. Products purchased elsewhere may vary. Always contact your re-

gion’s support center for assistance.

FOR SERVICE ONLY:

Futaba Service Center

3002 N. Apollo Drive, Suite 1

Champaign, IL 61822

Phone: 217-398-0007

www.futaba-rc.com/service.html

E-mail: [email protected]

FOR SUPPORT :

(PROGRAMMING AND USER QUESTIONS)

Please start here for answers to most questions:

www.futaba-rc.com/faq/

Fax: 217-398-7721

Phone: 217-398-8970 option 2

1M23N32602_7PX_E.indb 2

2017/08/02 14:16:56

1
2
3
...
»

Summary of Contents for 7PX

































































































































































































Reviews:

No comments

Related manuals for 7PX

Brand: CAME Pages: 98

Brand: CAME Pages: 16

Brand: CAME Pages: 8

Brand: nekos Pages: 8

Brand: nekos Pages: 8

Brand: Neles Pages: 12

Brand: Rain Bird Pages: 4

Brand: Rain Bird Pages: 2

Brand: Rain Bird Pages: 140

WeatherSmart RSC600i

Brand: Raindrip Pages: 36

Brand: Keba Pages: 16

Brand: KEB Pages: 16

NOVASTAT EL DIGITAL

Brand: Taconova Pages: 7

Brand: Blucave Pages: 2

Brand: Mäktig Pages: 10

Brand: WABCO Pages: 3

Brand: Paser Pages: 2

Ratio Feeder J+ Advanced Series

Brand: H.E. Anderson Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands