manualshive.com logo in svg

FUTABA 7PX, User Manual

The FUTABA 7PX is a high-performance, state-of-the-art radio control system perfect for avid RC enthusiasts. Unlock its full potential by accessing the comprehensive User Manual, available for free download from manualshive.com. This manual provides detailed instructions and invaluable insights to enhance your RC experience with the FUTABA 7PX.

Share
Download
background image

13

B

ef

or

e U

sin

g

-S.BUS servo

This is a special function that allows setting of the parameters of our S.BUS servo whose set-

tings are changed by using PC Link software.

-MC-Link

This is a dedicated function which allows setting of the contents of the Link software which 

makes possible Futaba speed controller (ESC), MC960CR, MC950CR, MC850C, MC851C, 

MC602C, MC402CR, etc. variable frequency and other data changes by PC at the T7PX.

-Throttle speed

Sudden trigger operation on a slippery road surface will only cause the tires to spin and the 

model to not accelerate smoothly. By setting the throttle speed function, operation can be per-

formed smoothly and easily. It also suppresses battery consumption.

-Steering speed

When you sense that the steering servo is too fast, etc., the servo operating speed (direction that 

suppresses the maximum speed) can be adjusted.

-Non-telemetry LED

When the telemetry function is OFF to confirm that the telemetry function is not operating.

-Dial select function

This function assigns functions to dials (digital trim, grip dial, knob). The step amount and oper-

ating direction can also be adjusted. Trim positioning at each model call is unnecessary because 

all the dials are digital.

-Switch select function

This function assigns functions to 5 switches. The operating direction can also be set.

-Wheel & Trigger position can be changed

The wheel position can be offset by using an accessory APA wheel position offset adapter. 

The wheel angle can also be adjusted.

The position of the throttle trigger can be moved forward and backward.

-Trigger brake lever replacement

The trigger brake lever is selected from a narrow nylon type and wide type

-Trim/dial lock functions

Lock functions which prohibit setting and operation by transmitter trim, and dials are provided.

-Left-handed support

The left and right installation direction of the wheel section can be reversed.

-Vibrator built into the grip

The vibrator can be operated at racing timer lap navigation, time-up, and low battery, telemetry 

alarm. It sets it on each function screen. 

1M23N32602_7PX_E.indb   13

2017/08/02   14:16:57

Summary of Contents for 7PX

































































































































































































Reviews:

No comments

Related manuals for 7PX

A10 Harmony Controller 2000 Installation Manual preview
Harmony Controller 2000
Brand: A10 Pages: 27
Acclaim Lighting Canvas User Manual preview
Canvas
Brand: Acclaim Lighting Pages: 32
Samson 3430 Operating Instructions Manual preview
3430
Brand: Samson Pages: 52
Samson 3275 Mounting And Operating Instructions preview
3275
Brand: Samson Pages: 32
Danfoss Cascade Operating Instructions Manual preview
Cascade
Brand: Danfoss Pages: 59
Eaton PKE-COM-RTU Instruction Leaflet preview
PKE-COM-RTU
Brand: Eaton Pages: 2
Eaton i-on30R Installation Instructions preview
i-on30R
Brand: Eaton Pages: 2
Eaton MEMSHIELD 4 Installation Instructions Manual preview
MEMSHIELD 4
Brand: Eaton Pages: 8
Ebyte E103-W03 Product Instruction Manual preview
E103-W03
Brand: Ebyte Pages: 38
EBS CPX200NB User Manual preview
CPX200NB
Brand: EBS Pages: 30
IFM Electronic ecomat 100 R 360 Operating Instructions Manual preview
ecomat 100 R 360
Brand: IFM Electronic Pages: 16
IFM Electronic Ecomot300 AC2630 Operating Instructions Manual preview
Ecomot300 AC2630
Brand: IFM Electronic Pages: 11
IFM Electronic AC1331 Installation Instructions Manual preview
AC1331
Brand: IFM Electronic Pages: 23
Mackie MDR 24/96 User Manual preview
MDR 24/96
Brand: Mackie Pages: 16
TANDBERG MCU Technical Description preview
MCU
Brand: TANDBERG Pages: 47
Taoglas EDGE Locate Quick Start Manual preview
EDGE Locate
Brand: Taoglas Pages: 2
Parker PWD Series Operation Manual preview
PWD Series
Brand: Parker Pages: 38
Parker Racor RK 30770 Operation And Safety Instructions preview
Racor RK 30770
Brand: Parker Pages: 2

Brands by name

Popular brands

Load more brands