Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
* Throttle trigger position
* Throttle trigger position
Warning
Setting the speed function in the return direction slows the deceleration of the car body, so
please be careful to set it carefully.
89
Fu
nc
tio
n
Speed
2
("Low", Middle", and "High" return direction delay adjustment)
Tap the [Return] side of [Low], [Middle]
or [High] value button. A warning is
displayed saying "Return speed will be
slow. Please be careful.". If you want to
use the return, tapped [Close]. Value input
buttons appear on the screen. Use the [+]
and [-] buttons to adjust the return speed
amount.
3
(Speed switching point adjustment)
When you want to change the "Low",
"Middle" and "High" switching point, tap the
[point 1] or [point 2] value button. Value in-
put buttons appear on the screen, use the
[+] or [-] buttons to move to the point you
want to set.
100
1
Servo operation is delayed.
Point
Point 1 :1~100
Point 1 :2~100
Initial value : 30
Speed range
High :1~100
Middle :1~100
Low :1~100
Initial value :
100, there is no delay.
4
When finished, return to the Racing menu screen by pressing the HOME button twice.
The throttle speed adjustment
"
Turn
"
and
"
Return
"
adjustment can be controlled with
digital trim DT1~DT6 or digital dial DL1 etc. with the dial select function. (page 66)
Dial / Trim Setting
1M23N32602_7PX_E.indb 89
2017/08/02 14:17:26
