manualshive.com logo in svg

FUTABA 7PX, User Manual

The FUTABA 7PX is a high-performance, state-of-the-art radio control system perfect for avid RC enthusiasts. Unlock its full potential by accessing the comprehensive User Manual, available for free download from manualshive.com. This manual provides detailed instructions and invaluable insights to enhance your RC experience with the FUTABA 7PX.

Share
Download
background image

160

Fu

nc

tio

n

Telemetry

Telemetry :GPS

When SBS-01G/02G (GPS sensor) sold separately is mounted on the car body, you can re-

ceive radio waves from GPS satellites and display information on the position and speed of 

the car.

* A GPS sensor must be installed in the model car. Install and connect the sensor in accordance with the 

sensor instruction manual.

* When powered up, the SBS-01/02G begins to acquire GPS satellite data. This process can take several 

minutes. Please do not move the model during this process. During acquisition, the LED on the SBS-
01/02G will blink green; after the satellite’s signals have been acquired, the LED will become solid green, 
and the GPS signal strength display on the transmitter will show three bars.

  Moving the model before the satellites are fully acquired will cause a delay in acquiring the satellite signal.
* Since GPS satellites are basically used, accurate distances and speeds may not be displayed depending 

on the surrounding environment or the conditions of the course.

Telemetry

Current distance

Current speed

The maximum when powering 
ON are shown.
* Tap the max display button to 

restart the measurement.

The maximum when powering 
ON are shown.
* Tap the max display button to 

restart the measurement.

Tap the [Preset reference]. Sets 
the current car position as the 
starting point.

Tap the [Preset reference]. Sets 
the current car position as the 
starting point.

Alarm and vibrator ON/OFF and 
type setting  (The  arrow indicates 
that an alarm is generated when 
the minimum distance below the 
set value and the  arrow indicates 
that an alarm is generated when 
the distance exceeds the set 
value.)

Alarm and vibrator ON/OFF and 
type setting (The  arrow indicates 
that an alarm is generated when 
the minimum speed below the 
set value and the  arrow indicates 
that an alarm is generated when 
the speed exceeds the set value.)

The Speech function 
(ON/OFF)

The position of the pres-
ent model is displayed.

This indicates the 
receiving accuracy 
from a GPS Satel-
lite. 

The Speech function 
(ON/OFF)

-Upper side:

Current distance and speed display.

-Lower:

This is a display of the maximum value of the 
measured distance and speed after turning on 
the transmitter power.

* Tap the max display button to restart the mea-

surement.

1M23N32602_7PX_E.indb   160

2017/08/02   14:17:43

Summary of Contents for 7PX

































































































































































































Reviews:

No comments

Related manuals for 7PX

CAME Z Series Instruction Manual preview
Z Series
Brand: CAME Pages: 12
CAME Z Series Technical Documentation Manual preview
Z Series
Brand: CAME Pages: 16
Ultrak KEGS5000 User Manual preview
KEGS5000
Brand: Ultrak Pages: 41
Zander Aachen ZX Series Quick Start Manual preview
ZX Series
Brand: Zander Aachen Pages: 10
Van Air SENTINEL Installation, Operation & Maintenance Instructions preview
SENTINEL
Brand: Van Air Pages: 4
National Instruments PXIe-4302 Calibration Procedure preview
PXIe-4302
Brand: National Instruments Pages: 14
National Instruments PXIe-4302 User Manual preview
PXIe-4302
Brand: National Instruments Pages: 31
National Instruments NI-9244 User Manual And Specifications preview
NI-9244
Brand: National Instruments Pages: 50
National Instruments NI 9870 Operating Instructions And Specifications preview
NI 9870
Brand: National Instruments Pages: 24
National Instruments NI 9247 Getting Started Manual preview
NI 9247
Brand: National Instruments Pages: 21
National Instruments NI 9242 Getting Started Manual preview
NI 9242
Brand: National Instruments Pages: 39
National Instruments NI 9218 Getting Started preview
NI 9218
Brand: National Instruments Pages: 22
National Instruments NI 9263 Calibration Procedure preview
NI 9263
Brand: National Instruments Pages: 8
National Instruments NI 9425 Getting Started Manual preview
NI 9425
Brand: National Instruments Pages: 20
National Instruments NI 9234 Getting Started preview
NI 9234
Brand: National Instruments Pages: 9
National Instruments FIeldPoint FP-AO-200 Operating Instructions Manual preview
FIeldPoint FP-AO-200
Brand: National Instruments Pages: 13
National Instruments NI 9205 Getting Started Manual preview
NI 9205
Brand: National Instruments Pages: 26
National Instruments FieldPoint FP-1000 Operating Instructions Manual preview
FieldPoint FP-1000
Brand: National Instruments Pages: 12

Brands by name

Popular brands

Load more brands