background image

Home screen

Menu screen

Model menu screen

Model select

Delete

 

execution

  Tap the [model data]

174

Fu

nc

tio

n

Model Delete (Model saved on microSD card)

This function deletes model data saved on the microSD card.
Model deletion is displayed on the menu only when microSD card is set in the T7PX card 

slot.

Model Delete (Model saved on microSD card)

1

 (selection of model data)

If the number of models that does not fit on one page is 
memorized, tap [1/2] in the upper right corner to move the 
page.
If there are 2 pages, it will be displayed as [1/2] / [2/2], if 
there are 5 pages, it will be displayed as [1/5] to [5/5].

2

 (execution of model deletion)

Tap the model you want to delete. A confir-
mation message "Are you sure?" appears. 
Tap [Yes] to execute the deletion, or [No] to 
cancel.
"Deleting succeeded" is displayed and de-
letion is completed.

3

  When finished, return to the Model menu screen by pressing the HOME button.

How to delete model data in microSD card

1M23N32602_7PX_E.indb   174

2017/08/02   14:17:46

Summary of Contents for 7PX

































































































































































































Reviews: