Product manual DALI MSensor 5DPI 14 | 06-2017 | 1.1 | en
Presence control
c
23 / 48
The following parameters can be adjusted:
Parameter
Description
"Go to Presence value"
The "Motion detected" synchronisation command is interpreted in the same way as if
the actual sensor detected motion.
"Go to Absence value"
The "Motion detected" synchronisation command causes the DALI MSensor to maintain
the absence value. If the sensor is already at the absence value, it keeps resetting the
switch-off delay and remains at that value. If the sensor is in the "OFF" state, it switches
to the absence value. If the sensor is at the absence value, the synchronisation
command is ignored.
MASK
The DALI MSensor ignores the "Motion detected" synchronisation command of the
other group (factory setting).
...
I
NOTICE
In the operating mode: "enabled (only OFF)", the DALI MSensor does not send synchronisation commands until
the sensor has been activated by a manual switch-on command.
In the operating mode: "enabled (only OFF)", the DALI MSensor does not respond to synchronisation commands
until the sensor has been activated by a manual switch-on command.
Summary of Contents for luxCONTROL DaLI Msensor 5DPI 14
Page 5: ...luxCONTROL DALI MSensor 5DPI 14 Product Manual ...
Page 6: ...c 2 48 ...
