Product manual DALI MSensor 5DPI 14 | 06-2017 | 1.1 | en
Constant light control
c
14 / 48
2.5
2.0
1.0
1.4
2.7
2.1
1.1
1.6
3.0
2.3
1.2
1.7
3.5
2.7
1.4
2.0
4.0
3.1
1.6
2.3
6.1.2. Operating modes
The ambient light sensor has three operating modes. Constant light control can be activated or deactivated.
Constant light control can also be deactivated temporarily.
Operating mode
Description
"enabled"
Light control of the luminaire group is activated by triggering the DALI MSensor.
"disabled"
The light control of the DALI MSensor is permanently deactivated. A fixed setpoint in the
luminaire group is invoked by triggering the DALI MSensor.
"temporarily disabled"
Light control can be temporarily deactivated by a manual intervention on another DALI
controller. Doing so temporarily switches off light control. The luminaires remain adjusted
to the corresponding setpoint. Light control is reactivated at the next switch-on or by an
activation command.
6.1.3. Commissioning
Setting operating modes
The individual operating modes can be set by using the masterCONFIGURATOR software (V2.12 or later) (see
).
Reference list
Setting the brightness setpoint
The brightness setpoint is set by using one of the supported IR remote controls or masterCONFIGURATOR.
Summary of Contents for luxCONTROL DaLI Msensor 5DPI 14
Page 5: ...luxCONTROL DALI MSensor 5DPI 14 Product Manual ...
Page 6: ...c 2 48 ...
