Product manual DALI MSensor 5DPI 14 | 06-2017 | 1.1 | en
Presence control
c
20 / 48
2.5
4.5
2.7
4.9
3.0
5.4
3.5
6.3
4.0
7.2
6.2.2. Operating modes
The motion sensor has four different operating modes.
Operating mode
Description
"enabled"
The light is switched on or off automatically in response to the presence of a person.
"enabled
(only OFF)"
The sensor switches off if there is no motion detected in the detection area, but does not
switch on again even if motion is detected. Switch-on must be obtained through a manual
switch-on command (e.g. using DALI RC). The manual switch-on command (e.g. scene
recall) must either be directed at the luminaire group or to all devices (broadcast) in order for
presence-based control to be activated. The DALI MSensor ignores switch-on commands
sent to other groups.
"disabled"
The motion sensor is deactivated. The light must be switched on and off manually.
"Never-Off"
After no motion has been detected and the delay time has elapsed, the sensor dims to a low
light value (absence value) but does not switch off.
I
NOTICE
The recommended maximum room height is 3 m for office applications and 4 m for corridor applications.
For presence detection, it is vital that arm movements, etc. can be detected.Position the sensor on the ceiling so
that the room user's hands are located in the centre of the detection area and are not concealed by display
screens, backs, etc.
Distiction between presence detection and motion detection:
Presence detection detects objects with the size of a human hand that make a movement between 0,3-0,5
m.
_
Motion detection detects an object with the size of human head that make a movement between 0,5-0,7 m.
_
Summary of Contents for luxCONTROL DaLI Msensor 5DPI 14
Page 5: ...luxCONTROL DALI MSensor 5DPI 14 Product Manual ...
Page 6: ...c 2 48 ...
