Product manual DALI MSensor 5DPI 14 | 06-2017 | 1.1 | en
Installation
c
10 / 48
The DALI MSensor either controls all the units on the DALI circuit or a DALI group. The DALI MSensor is
Multi-master compatible, i.e. it can be used in conjunction with other DALI controllers in the comfortDIM product
range. This allows the DALI MSensor to be addressed and grouped in the same way as DALI control gear and
makes it easy to configure the system.The DALI MSensor is configured in the masterCONFIGURATOR software
(V2.12 or later).
4. Installation
The DALI MSensor is connected directly to the DALI circuit and does not require its own power supply. It can be
connected to the DALI circuit without bothering about polarity. Power is supplied via the DALI circuit. The sensor
draws 6 mA.
...
Open-plan offices
_
Training/presentation rooms
_
Corridors, passageways and garages
_
I
NOTICE
A maximum of 12 DALI MSensors 02 can be operated on a single DALI circuit. If more sensors are connected,
the increased data traffic this causes has an adverse affect on the light control function.
Summary of Contents for luxCONTROL DaLI Msensor 5DPI 14
Page 5: ...luxCONTROL DALI MSensor 5DPI 14 Product Manual ...
Page 6: ...c 2 48 ...
