GU_TRIDENT_V_1_20_EN
25/47
Select and validate
Stop program.
TRIDENT will ask for confirmation :
A T T E N T I O N ! ! !
T h e p r o g r a m r u n n i n g
w i l l b e s t o p p e d . . .
N O V a l i d a t i o n - >
The +/- keys switch between NO and YES and the VAL
key validates the selection.
If YES is validated, the program is stopped.
TRIDENT returns to the welcome screen.
The program can be stopped by WINTRID, via the communication link.
Evidently, if the program is of fixed duration, it will stop automatically at the programmed time.
5.2.6
Results of a measurement program
In order to analyse the results, it is necessary to transfer the measurements to the P.C. via the series
link using WINTRID.
WINTRID enables the complete transfer of a measure program, whether finished or in progress. In
the second case, WINTRID indicates that the program is not finished until the transfer. However,
the program continues to its programmed termination without change. If there is a voltage fault at
the time of transfer, it will not be recorded.
While waiting for the transfer to begin, it can be useful to look at the measurements to make an
initial diagnosis.
M A I N M E N U
D i r e c t M e a s u r e m e n t s
C o n f i g u r a t i o n
- - > C o n s u l t a t i o n
For this, in the main menu, select and validate Consultation. TRIDENT shows the following
screen :
M E N U C O N S U L T A T I O N
F a u l t s
- - > S l o w v a r i a t i o n s
P a r a m e t e r s
