GU_TRIDENT_V_1_20_EN
15/47
5.2.2
Programming TRIDENT
TRIDENT can be completely configured using its local interface, in the same way as using
WINTRID.
For this, in the menu
configuration
, choose
Program
and enter:
C O N F I G U R A T I O N M E N U
- - > P r o g r a m
C O m m u n i c a t i o n
I n t e r n a l C l o c k
TRIDENT warns you that the last program will be erased permanently from the memory. Check
carefully that this program has been transferred to WINTRID.
A T T E N T I O N ! ! !
T h e m e m o r y w i l l b e
e r a s e d . C o n t i n u e ?
N O V a l i d a t i o n - >
The +/- keys move between NO & YES, and the VAL
key confirms the choice.
Confirm with YES to enter into the configuration menu.
There are 7 successive pages of configuration. They are all numbered and you can return at all times
to the entries on the previous page with the
key.
Choice of a standard or manual configuration:
C O N F I G . P R O G R A M 1 / 7
S t 1 : L I b e l l e 0 1
- - > S t 2 : L I b e l l e 0 2
C o n f i g . m a n u a l
The user must choose between one of the 2 Standards (of which the name and parameters have been
initialised by the WINTRID software), or the local configuration of all parameters.
The standards contain all parameters that will be required subsequently in the manual configuration.
Their names are those chosen at the time of their modification in WINTRID.
If one of the 2 Standards is chosen, it is only necessary to enter or validate the types of TC and TP
and the times and dates of the start and end of the program.
