1235 Hickory Street | Pewaukee, WI 53072
For Customer Support: 800-558-7008
4.
Dispose of remaining oil in the filter and the used filter in accordance to local
environmental laws and practices.
5.
Remove the old gasket from the filter head and wipe excess oil residue from the head.
6.
Remove the new filter from its packaging and insert the new gasket provided with the
filer into the gasket groove of the head.
7.
Thread the new filter onto the head turning it counterclockwise and hand tighten.
8.
Using the strap wrench, place the strap near the top of the filter to prevent collapsing
and turn the filter ¼ turn to tighten.
9.
Place the motor back on the pump and turn on.
10.
Dispense fluid from the nozzle and observe the filter gasket checking for leaks.
11.
If the leaking is noticed around the filer gasket, tighten the filter another ¼ turn with the
strap wrench and repeat the procedure.
Replacement Part
Part Number
Particulate Filter - 3 Micron Microglass Spin On Beta > 200 Absolute
36972
Particulate Filter - 10 Micron Microglass Spin On Beta > 200 Absolute
36973
Particulate Filter - 20 Micron Microglass Spin On Beta > 200 Absolute
36974
Water Filter - 10 Micron Nominal Spin On
36975
Water Filter - 25 Micron Microglass Spin On Beta > 200 Absolute
36995
