1235 Hickory Street | Pewaukee, WI 53072
For Customer Support: 800-558-7008
INTRODUCTION
The Low Viscosity (LV) Drum Pump filtration system has been designed to handle lubricants that
have a viscosity of 1250 cSt (5500 SUS) and below, directly filtering and dispensing lubricant
from a standard 55-gallon drum.
Exceeding the viscosity limits of this system can cause
damage to the motor.
All parts are made from high quality stainless steel and aluminum.
Before purchasing this unit, the customer should be aware of any specific requirements and/or
hazards of their lubricant and ensure that the fluid being filtered and dispensed is compatible
with the filter media and hose material.
REQUIRED ITEMS
Drum Pump motor – A motor is required to drive the pump shaft which attaches to the drive
coupler. It is interchangeable with different Trico Drum Pump designs. Only one motor is
needed and can be interchanged with multiple drum pumps.
30018 – Drum Pump Electric Motor, 1.1Hp, 110-120V, 50/60 Hz
30021 – Drum Pump Electric Motor, 1.1Hp, 220-230V, 50/60 Hz
30019 – Drum Pump Pneumatic Motor, 3/4 HP
INCLUDED COMPONENTS
Remove the Drum Pump components from the shipping container and inspect components for
any signs of damage.
Included Components:
•
(1) LV Drum pump assembly
•
(1) Hose Assembly
•
(1) Hand Wheel
•
(1) 3” Retaining ring
•
(1) Motor Drive Coupler
•
(1) Filter w/ gasket
•
(1) 2” MNPT Drum adapter
Tools required for assembly:
•
Large flat headed screwdriver
•
(2) x 2.5” adjustable wrenches
•
Filter Wrench/ Strap Wrench
If items are damaged contact the shipper. Trico Corporation provides a manufacturing
warrantee against product defects and workmanship up to 1 year of purchase, proof of
purchase required. It does not cover damage due to mishandling by shipper or customer nor
damages caused by misuse.
INSTALLATION AND OPERATION VIDEO
Scan this QR Code to see a series of videos on installing and operating the Drum
Pump Filtration System.
