TriboServ FlexxPump1, Original User Manual

Page: 43 / 54

Revision: 0
FlexxPump1 B
User Manual
43 EN-

Clean the FP1 B from dirt using suitable cleaning agents (e.g. absorbent towels,
cloths).
NOTICE
Compressed air can damage the seals of the FP1 B as well as
transport dirt and foreign bodies into the FP1 B or the lubri-
cant.
§
Do not use compressed air to clean the FP1 B.
7.1.1 Visual check

Reinstall all safety devices and make sure that no tools remain in the danger area.

Check that the FP1 B is turned on.

Carry out a "Quick Check" (test run) using the RUN command (section 6.3.7).

Check the entire lubrication system (FP1 B and any connected accessories including
tubes and distributors) for external damage (e.g. loose or loosened tubes) by a thoro-
ugh and conscientious visual inspection.

Check the condition of the lubrication point for correct supply of lubricant.

Replace damaged or defective parts immediately to ensure permanent lubrication.

Check the filling level of the cartridge on the FP1 B.

Check possible error messages on the FP1 B and remedy the causes accordingly.
7.1.2 Cleaning
7.1.3 Recommissioning after maintenance