EZ-PILOT STEERING SYSTEM INSTALLATION INSTRUCTIONS
3 –
IMD-600 Unit Installation
44
Mounting the IMD-600 unit in the cab
C
CAUTION –
Do not mount the IMD-600 unit outside the cab.
Mount the IMD-600 unit inside the cab:
- where it will not be covered by hand tools, tool boxes, chains, tow ropes, food or drink
coolers, and so on. Objects placed on top of the unit may cause vibration, which will degrade
the steering accuracy.
- where the electrical connector and cable will not be stepped on. If the unit is pushed out of
alignment from its original mounting orientation, steering accuracy will be degraded.
- either in-line with or at 90° angles to the vehicle’s forward travel direction. Nonorthognal
angles will cause performance degradation.
Note –
For best accuracy, mount the IMD-600 unit level and parallel to the machine's center line:
Machine centerline
IMD-600 unit
