EZ-PILOT STEERING SYSTEM INSTALLATION INSTRUCTIONS
2 –
EZ-Pilot System Installation
41
Removing the SAM-200 motor
To remove the SAM-200 motor from the
steering shaft, you need the following:
•
A steering wheel puller
. You can purchase
the puller from:
P/N 27017
, P/N 7403
www.autozone.com
(United States of
America only), P/N 27017
•
Grade 8.8, 8 mm x 1.25 x 120 mm bolts
,
available from
,
P/N 91280A567.
Place the supplied 5/16'' ID x ¾'' OD x
⅞
'' long
spacer over the telescopic lock shaft.
Alternatively, you can place three 10 mm hex
nuts over the telescopic lock shaft.
Additional information
www.trimble.com
.
5/16” ID x ¾" OD x 7/8" long spacer
OEM Tools 7403 puller
OTC Tools 7403 puller
