EZ-PILOT STEERING SYSTEM INSTALLATION INSTRUCTIONS
4 –
Display Connections
61
Step 3
Allow the adhesive promoter to dry. Remove
the backing tape from the foam strips and
then apply the plate to the cab roof. Ensure
that the foam strips make even contact with
the surface. Apply pressure to adhere.
Step 4
Attach the magnetic radio antenna base to a 5"
x 5" plate (P/N 62034).
Step 5
Route the RTK antenna's coaxial cable into the
cab, and connect the cable to the Trimble
display. Secure the cable along the route.
Example antenna mount
Example antenna mount