24
TRI TOOL INC.
92-1500 : Rev. 140425
Adjust the cutting speed by rotating the air flow control valve at the air
connection.
Feeding the Tool Bit Into the Work
Rotate the feed handle clockwise to bring the tool bit(s) and pipe closer
together.
The machining operation begins when the first tool bit contacts the pipe.
If the pipe end is not square to the pipe axis, the tool bit will contact only a
small segment of the pipe during each revolution.
To avoid tool bit damage, the feed rate should be very slow until all of the tool
bit(s) are in contact with the pipe continually during at least one full revolution.
Continue rotating the feed handle clockwise until the end of the pipe is
completely machined.
The axial feed rate of the tool bit is .0023” (.06 mm) for each graduation or
.083” (2.11 mm) for each complete revolution of the feed handle.
Continue machining until the end of the pipe has a complete prep.
Discontinue feed and allow the head to rotate 1 to 3 revolutions to improve
finish of the prep surface.
Release the trigger to stop the head rotation.
Feed Handle
Timing Mark
Graduation Mark
Feed Handle
