© Copyright 2018 TRENDnet. All Rights Reserved.
79
TRENDnet User’s Guide
TV‐NVR416
Start/Stop Streaming
Click this button to start or stop streaming. Select the display cell by click on it, (The
yellow frame will wrap around the selected display cell.) then click on the icon of
the stream you want. If the channel has been selected by others, stop that
streaming before you change.
Video Stream
Click this button to choose the video stream between main stream and sub stream.
1: main stream; 2: sub stream.
Display Mode
Click this button to select the display mode to display a single video on the screen
or display four videos on the screen at the same time.
Stream Mode
Click this button to change viewing stream from main to sub stream or back.
Microphone
Select the video channel and then click on this button to start/stop talking through
the camera.
Start/Stop All Streams
Click this button to start or stop all video streams.
Snapshot
Select the video you want to take a snapshot and then click this icon to take a video
snapshot.
Start/Stop Recording
Select the video you want to record and then click this icon to start or stop video
recording.
Zoom
Select single video display and then click once to enable zoom. When enabled, click
and drag the area on the picture to zoom in. Right click to resume 100% zoom. Click
the icon again to disable zoom. The zoom function works in full screen mode as
well.
Microphone
Select the video channel and then click on this button to start/stop talking through
the camera.
Speaker
Select the video channel and then click on this button to start/stop listening from
the camera. Use the slide below to adjust the volume.
Pan and tilt
controls
Brightness
Contrast
Saturation
HUE
Speed
Zoom
Focus
Aperture (Iris)
Presets
