© Copyright 2018 TRENDnet. All Rights Reserved.
42
TRENDnet User’s Guide
TV‐NVR416
Live View
Change the live view settings.
General
Live view general settings
Video Output
Interface:
The video output interface is VGA or HDMI
Live View Mode: Choose the default
Live View
mode to be
1x1
single
video on the screen or
2x2
four video on the screen at
the same time. Default: 2x2.
Dwell Time: Set up how long each display will be showed up on the
screen. There’s no effect on 2x2 display mode. On 1x1
mode, each video will be shown on the screen for
Dwell
Time
and then change to the next video. Default: 10
seconds.
Enable Audio Enable or disable audio output on the NVR. Default:
Output:
disabled
Event Output: Define where the video is going out when event
triggered. The NVR is set to both VGA and HDMI.
Full Screen
Monitoring
Dwelling Time:
When event triggered full screen display, who long the
video is going to stay on the screen. Default: 10
seconds.
Click
Apply
to apply the changes.
View
Setting live view display arrangement and sequence.
Live View Layout and Sequence Settings
Video Output
Interface:
The video output interface is VGA or HDMI
Camera List: Installed cameras will be listed here by channel.
