TRENDnet TV-NVR408 User Manual Download Page 107

 

 

 

 

 

 

 

 

 

 

© Copyright 2018 TRENDnet. All Rights Reserved. 

 

 

 

 
TRENDnet User’s Guide

 

TEW‐821DAP 

107

 

Limited Warranty 

TRENDnet  warrants  its  products  against  defects  in  material  and  workmanship,  under 
normal use and service, for the following lengths of time from the date of purchase.   

 

NVR – 2 Years Warranty 

AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty. 

If  a  product  does  not  operate  as  warranted  during  the  applicable  warranty  period, 
TRENDnet  shall  reserve  the  right,  at  its  expense,  to  repair  or  replace  the  defective 
product  or  part  and  deliver  an  equivalent  product  or  part  to  the  customer.  The 
repair/replacement  unit’s  warranty  continues  from  the  original  date  of  purchase.  All 
products  that  are  replaced  become  the  property  of  TRENDnet.  Replacement  products 
may  be  new  or  reconditioned.  TRENDnet  does  not  issue  refunds  or  credit.  Please 
contact the point‐of‐purchase for their return policies. 

TRENDnet shall not be responsible for any software, firmware, information, or memory 
data of customer contained in, stored on, or integrated with any products returned to 
TRENDnet pursuant to any warranty. 

There  are  no user  serviceable  parts  inside  the  product.   Do  not  remove  or  attempt  to 
service the product by any unauthorized service center.  This warranty is voided if (i) the 
product  has  been  modified  or  repaired  by  any  unauthorized  service  center,  (ii)  the 
product was subject to accident, abuse, or improper use (iii) the product was subject to 
conditions more severe than those specified in the manual. 

Warranty  service  may  be  obtained  by  contacting  TRENDnet  within  the  applicable 
warranty period and providing a copy of the dated proof of the purchase. Upon proper 
submission of required documentation a Return Material Authorization (RMA) number 
will be issued. An RMA number is required in order to initiate warranty service support 
for  all  TRENDnet  products.  Products  that  are  sent  to  TRENDnet  for  RMA  service  must 
have the RMA number marked on the outside of return packages and sent to TRENDnet 
prepaid,  insured  and  packaged  appropriately  for  safe  shipment.  Customers  shipping 
from outside of the USA and Canada are responsible for return shipping fees. Customers 
shipping from outside of the USA are responsible for custom charges, including but not 
limited to, duty, tax, and other fees. 

 

WARRANTIES  EXCLUSIVE

:  IF  THE  TRENDNET  PRODUCT  DOES  NOT  OPERATE  AS 

WARRANTED  ABOVE,  THE  CUSTOMER’S  SOLE  REMEDY  SHALL  BE,  AT  TRENDNET’S 
OPTION,  REPAIR  OR  REPLACE.  THE  FOREGOING  WARRANTIES  AND  REMEDIES  ARE 
EXCLUSIVE  AND  ARE  IN  LIEU  OF  ALL  OTHER  WARRANTIES,  EXPRESSED  OR  IMPLIED, 
EITHER  IN  FACT  OR  BY  OPERATION  OF  LAW,  STATUTORY  OR  OTHERWISE,  INCLUDING 

WARRANTIES  OF  MERCHANTABILITY  AND  FITNESS  FOR  A  PARTICULAR  PURPOSE. 
TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR 
IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE 
OR USE OF TRENDNET’S PRODUCTS. 

 

TRENDNET  SHALL  NOT  BE  LIABLE  UNDER  THIS  WARRANTY  IF  ITS  TESTING  AND 
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST 
OR  WAS  CAUSED  BY  CUSTOMER’S  OR  ANY  THIRD  PERSON’S  MISUSE,  NEGLECT, 
IMPROPER  INSTALLATION  OR  TESTING,  UNAUTHORIZED  ATTEMPTS  TO  REPAIR  OR 
MODIFY,  OR  ANY  OTHER  CAUSE  BEYOND  THE  RANGE  OF  THE  INTENDED  USE,  OR  BY 
ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD. 

 

LIMITATION  OF  LIABILITY:  TO  THE  FULL  EXTENT  ALLOWED  BY  LAW  TRENDNET  ALSO 
EXCLUDES  FOR  ITSELF  AND  ITS  SUPPLIERS  ANY  LIABILITY,  WHETHER  BASED  IN 
CONTRACT  OR  TORT  (INCLUDING  NEGLIGENCE),  FOR  INCIDENTAL,  CONSEQUENTIAL, 
INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR 
PROFITS,  LOSS  OF  BUSINESS,  LOSS  OF  INFORMATION  OR  DATE,  OR  OTHER  FINANCIAL 
LOSS  ARISING  OUT  OF  OR  IN  CONNECTION  WITH  THE  SALE,  INSTALLATION, 
MAINTENANCE,  USE,  PERFORMANCE, FAILURE,  OR  INTERRUPTION OF THE  POSSIBILITY 
OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND 
OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF LIABILITY 
FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL 
OF ITS ESSENTIAL PURPOSE. 

 

Governing  Law

:  This  Limited  Warranty  shall  be  governed  by  the  laws  of  the  state  of 

California. 

Some  TRENDnet  products  include  software  code  written  by  third  party  developers. 
These  codes  are  subject  to  the  GNU  General  Public  License  ("GPL")  or  GNU  Lesser 
General Public License ("LGPL").  

Go  to  http://www.trendnet.com/gpl  or  http://www.trendnet.com  Download  section 
and  look  for  the  desired  TRENDnet  product  to  access  to  the  GPL  Code  or  LGPL  Code. 
These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of 
the developers. TRENDnet does not provide technical support for these codes. Please go 
to  http://www.gnu.org/licenses/gpl.txt  or  http://www.gnu.org/licenses/lgpl.txt  for 
specific terms of each license. 

PWP05202009v2 

 

 

 

 

 

 

1.30.18 1.01 

Summary of Contents for TV-NVR408













































































































Reviews: