TRENDnet TV-NVR408 User Manual Download Page 14

Page: 14 / 108

TRENDnet User’s Guide

TV‐NVR416

Previous Screen: In

Single Screen

mode, you can manually switch the

video to the previous channel.

Next Screen: In

Single Screen

mode, you can manually switch the

video to the next channel.

Stop/ Start Auto‐

switch:

Start (default) or stop automatic live view switch. The
live view video will be changed by channel sequence.

Start Recording: Start

Continuous

Motion Detection

recording.

To set up motion detection area, or stop continuous and
motion detection recordings, you need to navigate to
the detailed settings through the main menu.

Stop Recording: Stop

Continuous

Motion Detection

recording.

Add Camera: Click this to go directly

to IP Camera Management

Playback: Click

Playback

to go full playback menu.

PTZ Control: Click this to open the PTZ control panel for the

supported cameras

Summary of Contents for TV-NVR408











































































































Search results

Summary of Contents for TV-NVR408

Reviews:

Brands by name

Popular brands

TRENDnet TV-NVR408, User Manual

Search results

Summary of Contents for TV-NVR408

Reviews:

Brands by name

Popular brands