© Copyright 2018 TRENDnet. All Rights Reserved.
101
TRENDnet User’s Guide
TV‐NVR416
Storage Settings
Storage Management
To setup and initiate the hard drive remotely, check the hard disk drive and then
click on
Format
.
Format:
Select the storage volume and then click
Format
to format
your hard disk drive. This action will format the volume for
video recording. Placeholder files (formatting files) will be
created to make sure disk allocation is appropriate and the
file searching is optimized.
Capacity:
The total capacity of the hard disk can be used for video
recording and log.
Free Space:
The free space left for video recording and log.
Status:
The disk status.
Property:
This network storage is read only or can be read and write.
Network Storage
Network Storage must be setup before it can be managed
.
You can add up to 8
network storages for your NVR
.
The recordings will subsequently be stored in these
spaces. Save video from the first storage and then the next when the first one is full.
Click on the entry to change the settings and click Save to save the settings.
Server
Address:
Enter the IP address of your network storage.
File
Path:
Enter the shared folder as file path for network storage.
You can create a folder under the shared folder and make
it a network volume here. Just create the folder and enter
the correct path name here.
Type:
Choose between NAS or IP SAN for storage Type.
Delete:
Click the delete x to remove the storage settings.
