TRENDnet TV-IP200W, User Manual, Page: 52 / 145

51
Reset:
The Reset command restarts the Wireless Internet Camera just
like turning the device off and on and saved settings are retained.
The Reset panel contains the message “Do you really want to
reset this device?” and a YES button. If you do not want to reset
the Wireless Internet Camera, exit the panel without clicking
YES, otherwise, click on the
“YES” icon and the reset process
will initiate.
Factory Reset:
A factory reset restarts the Wireless Internet Camera and returns
all of its settings to their default values. The Factory Reset panel
contains the message “Do you really want to factory reset this
device?” and a YES button. If you do not want to carry out a
factory reset command, exit the panel without clicking YES,
otherwise click on the
“YES” icon and factory reset will be
initiated.
Note:
The Network must be reconfigured after a Factory Reset.
Once the configuration is completed click on
“Home” to return to
the Welcome screen and select the desired Viewing Image either
through ActiveX Mode or Java Mode as described in the next
section.
Then position the Wireless Internet Camera to the desired
location appropriately for your purpose. Followed by adjustment
of the Wireless Internet Camera focus, done manually by turning
the lens clockwise or anti-clockwise to the desire image quality.
Please refer to the appendix for detailed information regarding
Adjust Internet Camera Focus and Replacing the Lens.