TRENDnet TV-IP200W, User Manual, Page: 37 / 145

36
same with ASCII input ‘12345’. To setup 128-bit WEP key,
input 26 HEX format, for example,
‘31323334353637383930313233’, this is the same with ASCII
input ‘1234567890123’. These character counts result in bit
counts of 40 and 104, respectively; the Wireless Internet Camera
will automatically pad your input to a bit count of 64 or 128.
On the Confirm WEP Key field, input the same characters as the
Encryption Code field.
Make sure the Encryption Code is the same with the access
point’s encryption code that the Wireless Internet Camera is to be
connected under Infrastructure mode. Your PC/Notebook’s
encryption code also needs to be setup the same with the Wireless
Internet Camera's encryption code under either Infrastructure
mode or Ad-hoc mode.
The default setting for the Encryption Key is Disable therefore, to
secure the wireless transmission be sure to Enable the Encryption
Key by entering the relevant data.
Note:
Carefully input Encryption Code, any error setting will cause
communication link to fail.
LED Control:
The LED control allows user to setup the LED illumination as
desired. This feature provides the flexibility when surveillance
activity is ON.
There are three options as follows:
??
Normal –
Power - Steady On of the LED indicator.