manualshive.com logo in svg

TRENDnet TV-IP200W, User Manual, Page: 42 / 145

Share
Download
TRENDnet TV-IP200W User Manual Download Page 42

 

41 

Frame Rate: 

Select the frame rate desired with default setting at Auto for 
optimal frame rate.

 

 

Brightness Control:

 

Adjust the brightness level with default setting at 64. 
 

Contrast Control: 

Adjust the contrast level with default setting at 64.

 

 

Hue Control: 

Adjust the hue level with default setting at 64.

 

 

Light Frequency: 

Adjust the light frequency to suit your area of operation from the 
options either 50 Hz or 60 Hz (default).

 

 

Note: 

50 Hz and 60 Hz variants are available to accommodate the 
different light frequency found in USA (60 Hz) and Europe (50 
Hz) for the Wireless Internet Camera to ensure better image 
quality. 
 

Save/Cancel: 

After making sure all settings in the Image are correct, click on 
the 

“Save”

 icon to store the settings for the  Wireless Internet 

Camera.  You can alternatively click on the 

“Cancel”

 icon to 

restore all settings to the values last saved to or retrieved from the 
Wireless Internet Camera. 

Summary of Contents for TV-IP200W


















































































































































Reviews:

No comments