TRENDnet TV-IP200W, User Manual, Page: 36 / 145

35
regulatory region which the unit is sold. The default setting is at
channel 11.
Encryption WEP Key:
Wireless network communications are easily intercepted. WEP
(Wired Equivalent Privacy) is an encryption method specified by
the IEEE 802.11b standard to make any intercepted
communications extremely difficult to interpret by unauthorized
parties.
To enable WEP Encryption, first decide which WEP key format
will be applied. Click on ASCII or HEX check box to select
input format as ASCII format or HEX format, and then input
WEP key. To Confirm the WEP key you must enter the data
once again in the Confirm WEP Key field.
ASCII input format:
ASCII format causes each character you type to be interpreted as
an eight-bit value. All unaccented upper- and lower-case Western
European characters that can be input through your keyboard's
typing zone are valid. To setup 64-bit WEP key, input 5 ASCII
characters, for example, ‘12345’. To setup 128-bit WEP key,
input 13 ASCII characters, for example, ‘1234567890123’.
These character counts result in bit counts of 40 and 104,
respectively; the Wireless Internet Camera will automatically pad
your input to a bit count of 64 or 128.
HEX input format:
Hex format causes each pair of characters you type to be
interpreted as an eight-bit value in hexadecimal (base 16)
notation. Only the digits 0 through 9 and the letters A through F
(in upper or lower case) are valid. To setup 64-bit WEP key,
input 10 HEX format, for example, ‘3132333435’, this is the