manualshive.com logo in svg

TRENDnet TV-IP200W, User Manual, Page: 136 / 145

Share
Download
TRENDnet TV-IP200W User Manual Download Page 136

 

135 

G Glossary of Terms 

 

 

NUMBERS 

 

 

 

10BASE-T 

10BASE-T is Ethernet over UTP Category III,IV, or  V unshielded 
twisted-pair media. 

 

 

100BASE-TX 

The two-pair twisted-media implementation of 100BASE-T is 
called 

100BASE-TX

. 

 

 

802.11b 

An IEEE standard for wireless local area networks. It offers 
transmissions speeds at up to 11 Mbps in the 2.4-GHz band. 

 

 

A

 

 

 

 

Access point 

It is the hardwa re interface between a wireless LAN and a wired 
LAN. The access point attaches to the wired LAN through an 
Ethernet connection.   

 

 

Applet 

Applets are small Java programs that can be embedded in an 
HTML page. The rule at the moment is that an applet can  only 
make an Internet connection to the computer form which the 
applet was sent. 

 

 

ASCII 

American Standard Code For Information Interchange, it is the 
standard method for encoding characters as 8-bit sequences of 
binary numbers, allowing a maximum of 256 characters. 

 

 

ARP 

Address Resolution Protocol. ARP is a protocol that resides at the 
TCP/IP Internet layer which delivers data on the same network by 

Summary of Contents for TV-IP200W


















































































































































Reviews:

No comments