manualshive.com logo in svg

TRENDnet TV-IP200W, User Manual, Page: 129 / 145

Share
Download
TRENDnet TV-IP200W User Manual Download Page 129

 

128 

H Adjust Internet Camera Focus

 

 
The Wireless Internet Camera features an exchangeable CS-type 
lens that can be used for different applications as necessary.  It 
supports rotational focus control so the lens can be adjusted to 
focus under normal and stable conditions to maximize the image 
quality of the Wireless Internet Camera. 
 
To adjust the focus of the lens you need to turn the lens slowly in 
either clockwise or anti-clockwise direction until the desired 
image appears.  DO NOT over turn the lens in either of the 
directions as it will be out of focus.  Unless you want to substitute 
the lens DO NOT unscrew more than 1.0mm apart from the Fixed 
Lens Assembly. 
 
Keep in mind while adjusting the Wireless Internet Camera's 
focus you can review the image quality from the Web browser. 
 
 
 
 
 
 
 
 
 
 
 
 

 

Camera Lens  

Adjust by turning 

clockwise or anti-clockwise 

Fixed Lens Assembly 

DO NOT adjust 

Summary of Contents for TV-IP200W


















































































































































Reviews:

No comments