manualshive.com logo in svg

TRENDnet TV-IP200W, User Manual, Page: 11 / 145

Share
Download
TRENDnet TV-IP200W User Manual Download Page 11

 

10 

Support Variety of Platforms 

 
Supporting TCP/IP networking, SMTP e-mail, HTTP and other 
Internet related protocols.  The Wireless Internet Camera can be 
utilized in a mixed operating system environment such as 
Windows, Unix, and Mac.  It can be integrated easily into other 
www/Intranet applications. 
 

Wired and Wireless Network 
Support 

 
The Wireless Internet Camera  supports both wired and wireless 
transmission providing the advantage of mobility, flexibility and 
high-speed of wireless LAN based technology IEEE 802.11b to 
transform  the Wireless Internet Camera into a total solution for 
your network.  There are three modes available configured from 
the slide switch on the rear panel. 

??

Local Area Network (Ethernet / Fast Ethernet) Only 

??

Local Area Network (Ethernet / Fast Ethernet) and 
Wireless Local Area Network (802.11b) 

??

Wireless Local Area Network (802.11b) Only 

 

Summary of Contents for TV-IP200W


















































































































































Reviews:

No comments