© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPE‐TG82ES
21
Add static unicast entries to the switch
Network > Static Unicast
In this section, you can add static unicast entries to the switch configuration.
1. Log into your switch management page (see “
Access your switch management page
”
on page 6).
2. Click on
Network
and click on
Static Unicast
.
3. Review the settings.
802.1Q VLAN
– Enter the VLAN ID where the MAC address will reside.
Note:
By default, all switch ports are part of the default VLAN, VLAN ID 1.
MAC Address
– Enter the MAC address of the device to add.
Port Member –
Select the port where the MAC address will reside.
Click
Apply
to add the Static Unicast entry to the list.
In the list, you can click
Modify
to modify an entry or click
Delete
or delete the entry
.
You can also click
Delete All
to delete all the entries in the list. If the entries span
multiple pages, you can navigate page number in the
Page
field and click
Go
or you can
click
First, Previous, Next,
and
Last Page
to navigate the pages.
4. In the left hand panel, click on
Save
5. Click
Save Settings to Flash
, then click
OK
Note:
This step saves all configuration changes to the NV‐RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
