© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-721BRM
21
3. Under Packet Filter section select Enable and click Apply.
Filter
1. To create a new filter rule. Click Add in the Filters section.
2. Review the settings and click Apply to save.
Name:
Enter the name of the filter.
Interface:
Type:
Select the type of packets to filter. In for incoming packets and Out to filter
outgoing packets Select the interface used for the filter..
Default Action:
Select to drop or allow the packets.
Rules
1. To create a new rule. Click Add in the Rules section.
2. Review the settings and click Apply to save.
Filter Name:
Select the filter name to apply the rule. Enter the name of the filter.
Enable:
Check to enable rule
Ether Type:
Select the ether type to apply on the rule.
Protocol:
Select the protocol type to apply on the rule.
Action:
Select the action to take on the rule
Origin/Destination IP:
Enter the IP address of the packets origin and destination
Origin/Destination Mask:
Enter the Subnet mask of the packets origin and
destination.
VLAN ID:
Enter the VLAN ID to apply on the rule
VLAN Priority:
Enter the VLAN priority of the packets
VLAN Encapsulation:
Enter the encapsulation type
FQDN: Enter the domain name
ALG:
Select the ALG type
IP Option:
Select IP option type
Summary of Contents for TEW-721BRM
Page 1: ...TRENDnet User s Guide Cover Page...
Page 64: ......