Gigabit Ethernet Switch User’s Guide
Web-Based Network Management
85
The default serial port settings are:
Baud Rate=9600
Data Bits=8
Flow Control=X on/X off
Parity=None
Stop Bits=1
The information is described as follows:
♦
Console Timeout
Choose
Never
,
15 minutes
,
30 minutes,
45 minutes
, or
60 minutes
for the desired refresh setting.
♦
Serial Port
The options for the current console port
setting are
Console
or
Slip.
♦
Baud Rate
Determines the serial port bit rate that will be
used the next time the Switch is restarted. Applies only
when the serial port is being used for out-of-band (SLIP)
management; it does not apply when the port is used for the
console port. Available speeds are 2400, 9600, 19,200 and
38,400 bits per second. The default setting in this Switch
version is 9600.