Gigabit Ethernet Switch User’s Guide
Using the Console Interface
69
Figure 6-28. Forwarding Table
To browse by MAC address, select
MAC address
in the
Search by
field, enter the desired MAC address in the next field, and then
press FIND.
To browse by port number, select
Port
in the
Search by
field,
enter the desired port in the next field, and then press FIND.
A forwarding table containing
Port
,
MAC Address
, and
Learned
status is located on the lower part of the screen.
Resetting the Switch
You can use the console interface to reset the Switch, either doing
a Restart System (which restarts the Switch and is identical to
powering the Switch off and back on again) or a Factory Reset to
Default Value (which sets all of the Switch’s parameters to what
they were when the Switch was delivered from the factory).