Gigabit Ethernet Switch User’s Guide
12
Identifying External Components
♦
RS-232 DCE console port for diagnosing the Switch via a
connection to a PC and Local Console Management.
♦
Comprehensive LED indicators that display the conditions of
the Switch and status of the network. A description of these
LED indicators follows (see
LED Indicators
).
Rear Panel
The rear panel of the Switch consists of an AC power connector.
The following shows the rear panel of the Switch.
Figure 3-2. Rear panel view of the TEG-S40SX
♦
AC Power Connector
This is a three-pronged connector
that supports the power cord. Plug in the female connector of
the provided power cord into this connector, and the male
into a power outlet. Supported input voltages range from
100 ~ 240 VAC at 50 ~ 60 Hz.
Right Side Panel
The right side panel of the Switch contains two system fans. The
following shows the right side panel of the Switch.