TRENDnet TEG-S40SX, User Manual, Page: 49 / 122

Gigabit Ethernet Switch User’s Guide
Using the Console Interface 41
Figure 6-9. Console Configuration screen
The following fields can be set:
Restart Setting:
♦ Console Timeout This setting for the restart of the console
is 15 mins , 30 mins , 45 mins , 60 mins , or Never .
♦
Serial Port Determines whether the serial port should be
used for out-of-band (SLIP) management or for console
management, starting from the next time the Switch is
restarted. In this field, you can toggle between
SLIP or
Console port type settings.
♦
Baud Rate Determines the serial port bit rate that will be
used the next time the Switch is restarted. Applies only
when the serial port is being used for out-of-band (SLIP)
management; it does not apply when the port is used for the
console port. Available speeds are 2400, 9600, 19,200 and
38,400 bits per second. The default setting in this Switch
version is 9600.