Gigabit Ethernet Switch User’s Guide
18 Switch
Management
network loop, and automatically establish and activate a backup
path in the event of a path failure.
Console port (RS-232 DCE)
Out-of-band management requires connecting a PC (with a SNMP
management platform) to the RS-232 DCE console port of the
Switch. Switch management using terminal emulation/VT100
when connected to the RS-232 DCE console port is called
Local
Console Management
to differentiate it from management done via
management platforms.
The console port is set for the following configuration:
◊
Baud
rate: 9,600
◊
Parity:
none
◊
Data width:
8 bits
◊
Stop
bits: 1
IP Addresses and SNMP Community
Names
Each Switch has its own IP Address, which is used for
communication with an SNMP network manager or other TCP/IP
application (for example BOOTP, TFTP). You can change the
default Switch IP Address to meet the specification of your
networking address scheme.
In addition, you can also set in the Switch an IP Address for a
gateway or a router. It is useful when the network management
station is not located on the same network as the Switch, making it
necessary for the Switch to go through a gateway or router to
reach the network manager.