Gigabit Ethernet Switch User’s Guide
84
Web-Based Network Management
♦
Use Config File
Determines whether or not the Switch
should download its configuration file the next time it is
booted.
♦
Config File Name
The path and configuration name on
the TFTP server.
♦
Last TFTP Server Address
The IP address of the TFTP
server where the configuration file was located in the last
configuration change.
Console
This screen allows you to select the protocol for
communicating through the console port,
Console
or
SLIP,
in
the
Serial Port
field. Use SLIP for out-of-band management.
You can also specify the refresh rate in the
Console
Timeout
field and the desired setting in the
Baud Rate
field. Click Apply and then reboot the Switch for console port
settings to take effect.