TRENDnet TE-350, User Manual

Page: 52 / 60

TE-350 Print Server
50
The parameters are described as follows:
D Four decimals separated with dots (i.e.: 255.255.0.0)
E : Enable or Disable
I : Interval Value. It is from 0 to 255.
H : Extended ASCII Code to Hexadecimal String. For example:
If the parameter is <Esc>3 and its type is H, then 1B33 is
filled in the parameter field.
M : Operation Mode: it may be either PS (Print Server Mode) or
RP (Remote Printers mode).
P : Physical port: (Parallel Port 1)
S : ASCII String
Y : YES or NO
xxxx Parameter
Type
Factory
Default
Description
0001 S SCxxxxxx TE-350’s Name
0011
E Enable NetWare Protocol Stack
0012 E Unsupported TCP/IP Protocol Stack
0013 E Unsupported AppleTalk Protocol Stack
0030
b Unsupported Serial port’s Baud rate
0031 s Unsupported Serial port’s Stop bits
0032 p Unsupported Serial port’s parity
0033
d Unsupported Serial port’s Data bits
0034 h Unsupported Serial port’s handshake
0100 P P1 Physical port of Logic printer 1
0101
H Pre-string of Logic printer 1
0102 H Post-string of Logic printer 1
0103 Y NO LF change of Logic printer 1