TRENDnet TE-350, User Manual

Page: 46 / 60

TE-350 Print Server
44
ever, if the printouts are not the same, there may be
a problem with TE-350. Call your dealer.
P5: My TE-350 does not appear in the Active Device List of the
PSCONFIG program.
S5 : The Ethernet frame type of your PC may be different than the one
with your TE-350. Do the following:
1. Wait for a minute. The NetWare file server may not have
recorded the dynamic information of your TE-350.
2. Perhaps the Ethernet frame type of your TE-350 is disabled.
Locate your TE-350 so that it is on the same network
segment with your PC and run
QUICKSET program again.
P6: My TE-350 cannot log in to a file server.
S6 : The following steps may solve this problem:
1. Get the print server information as described in the Get Print
Server Information section of Chapter 5. If it plays the role
of a print server, the information will look like the
following:
Server Name: SC110049
Master File Server: ICE
Print Server Mode Status:
ICE: Connected
PMTR: Connected
Remote Printer Mode Status: N/A
Remote Printer Mode
Status: N/A means that the TE-350 does not
play the role of remote printer.
Server Name:
The name of the TE-350.
Master File Server: The master file server to the TE-350.
FILE_SERVER:
STATUS: Describes the status of the TE-350. Plus
on the FILE_SERVER.
The status can be the following: