TRENDnet TE-350, User Manual

Page: 33 / 60

Advanced Functions
31
Configuring Logical Printers
In NetWare, before you can use a logical printer, you must create the
logical printer for your TE-350 using PCONSOLE and assign a print
queue to the printer. When creating logical printers, be sure to select
printers greater than 7 from the
Configured Printer listing. The logi-
cal printer number must be greater than 7. In NetWare, all printer
numbers greater than 7 are logical printers. Also keep in mind that se-
lecting printer 8 corresponds to Logical printer L1, selecting printer 9
corresponds to Logical printer L2,………and selecting printer 15 cor-
responds to Logical printer L8.
To define pre-string, post-string, and the physical output port of a
logical printer, do the following:
1. Run the PSCONFIG program.
2. Select ChangeConfiguration .
3. Select Logical Printer Configuration and edit the following
items then send them to your TE-350 as described in Send
Setup Information to the TE-350 under the appropriate Print
Server mode section in Chapter 3.
Ln Physical Port:
Ln String Before Job:
Ln String After Job:
Ln Convert LF to CR+LF:
Ln
TE-350 has 1 parallel port, Ln is for logic
printers L1 to L3 respectively.
Physical Port P1 is parallel port 1.
The format of a string is hexadecimal.
If the character length of a pre-string or post-
string is over 15, the succeeding characters will
be truncated. Likewise, the total memory space
for the eight logical printer pre-strings and post-
strings is 44 bytes, any succeeding characters