TRENDnet TE-350, User Manual

Page: 24 / 60

TE-350 Print Server
22
A.
Create Queues
Follow the steps below to create queues for the TE-350. If using
existing queues go to Step B.
1. Run PCONSOLE program.
2. Select Print Queue Information (or skip to step B-1 if you
do not need to add new queues).
3. Press [I
NS
] key to add a new queue.
4. Type a queue name, and press [E
NTER
] .
5. Repeat Step 3 and 4 until you have the desired number of
queues.
B.
Assign printers
To assign printers to the TE-350, do the following:
1. From the PCONSOLE Main Menu, select Print Server
Information
2. Select a NetWare Print Server.
3. Select
Print Server Configuration .
4. Select Printer Configuration
5. Select printers that show Not Installed .
6. Make changes to the Name Field and Type Field. Refer to
the Using PCONSOLE and PSCONFIG section of this
chapter to make the correct entries.
7. Press [E
SC
] .
8. Select YES.
9. Repeat steps 2 to 8 until all printers are assigned.
10. Press
[E
SC
] .
C.
Associate printers with print queues
To assign a queue to the TE-350 printer, follow the instructions
below:
1. Select Queues Serviced by Printer.
2. Select a printer you want to assign a print queue to.
3. Press
[I
NS
] .