TRENDnet TE-350, User Manual

Page: 50 / 60

TE-350 Print Server
48
P10: PSCONFIG shows "No Response."
S10: It may be:
1. The network traffic is busy now. Wait for a minute and then
try it again.
2. The TE-350 is not powered on. Power it on.
3. The network cable is disconnected. Check the cable.
4. The node address of the TE-350 may be the same as the
node address of another device on the network.
P11: QUICKSET execution terminated due to timeout when checking
if the TE-350 had logged in to the file servers.
S11: It means that the TE-350 did not log in the master file server. It
might be that the frame type of the master file server is not the
same as the other file servers and the TE-350 has locked its
frame type to the other file server. If this is the case, you need
to:
1. Find a workstation that uses the same frame type as the TE-
350 so that the TE-350 appears in the device list of the
PSCONFIG program.
2. Using PSCONFIG program, enable the TE-350's frame type
to the frame type that the master file server uses and disable
all other frame types.
P12: I cannot receive Notify message in NetWare 4.x environment.
S12: Do the following actions:
1. Make sure you are a Notify member of the TE-350.
2. Run NetAdmin and o set the name of the Default Server to
receive notification.