TRENDnet TE-350, User Manual

Page: 32 / 60

TE-350 Print Server
30
2. Assign the queues to service these printers using
PCONSOLE.
3. Run PSCONFIG and select Set to NetWare Remote Printer
Mode in PSCONFIG . Enter the correct NetWare print server
names in the print server name fields, then select Execute
Setup .
Logical Printer Function
In the print server mode in the NetWare environment, there are three
logical printers for TE-350. A logical printer is an advanced device
driver that allows you to manipulate print data before sending it to the
printer. The TE-350 provides three ways to manipulate print data:
•
Add a pre-string in front of a print job.
•
Convert Line Feed code into Line Feed code + Carriage Re-
turn code.
•
Add a post-string after a print job.
Suppose a user sets the printer to Landscape Mode and forgot to set it
back to Portrait after the print job was finished. The following user
who wants to have a Portrait printout will get an erroneous print for-
mat. The logical printer concept can be used to solve the problem. The
solution is as follows:
1. Edit the pre-string of logical printer 1 to be the printer
commands of landscape print and the post-string of logical
printer 1 to be the printer reset command.
2. Edit the pre-string of logical printer 2 to be the printer
commands of Portrait print and the post-string of logical
printer 2 to be the printer reset command.
The user who wants to have a Landscape print format can send the
print job to logical printer 1. The user who wants to have a Portrait
print format can send the print job to logical printer 2.