41
Assemble steps:
Be sure to turn off the machine and disconnect the power before assembling.
1.
Mount mixing bowl on the body, insert mixing axle into exposed motor shaft in mixing bowl with pointing to the hexagon
holes. lf it is cocked, rotate the mixing axle slighting, it will be successfully installed to right place.
2.
Lock the fastening plate in a clockwise direction.
3.
Insert the extruding axle.
4.
Fix the disc in on the extruding head.
5.
Fix the extruding head to the fastening plate.
6.
Tighten the disc nut in a clockwise direction.
7.
Insert top cover into housing with bayonet pointing to hole in front of the mixing bowl. Press it down, finish assembly with
a click sound.
5
CLEANING AND MAINTENANCE
1. Disassemble all the parts, keep aside to be dry in the open air.
2. Use the cleaning scraper to clean the mixing bowl after it’s dry
3. Use the cleaning scraper to clean the mixing axle after it’s dry
4. Use the cleaning scraper needles to clean the extruding discs after it’s dry
ATTENTION: Do not clean all the parts immediately after using, put aside in the open air or in refrigerator around 2 hours, then
it will be much easier to clean with cleaning scraper.
1. Cleanliness
Clean the parts in mixing bowl immediately with proper water and detergent after finishing making noodles. Carefully wash the
parts contacted with flour.
Cleanliness method: Disassemble all parts in mixing bowl first, put them in clean water and clean with cloth. Wipe them with
dry cloth and then assemble after cleanliness.
After the machine is cleaned and assembled, please put it in safe place, away from fire, humid, direct sunlight and children.
Do not immerse the body in water or other liquids to avoid electricity leakage.
It is more easily to clean the pasta left in mixing bowl and discs after dry.
2. Extruding discs cleanliness method
When the noodles produced, unscrew the discs nut, remove discs, put it in ventilated place for about 2 hours, preferably in the
place with direct sunlight. After the flour is dry, gently knock the disc, it can be cleaned very well, then wash it with water.
DON'T WASH THE DEVICE IN THE DISH WASHER
