24 • SLASH KIT
E. CHASSIS ASSEMBLY
CHASSIS BAG
CHASSIS BAG
TOOLS BAG
E6. Slide the antenna wire into the antenna tube and install into the post on the lower receiver box
3x6mm BCS (2)
Route wires through
the lower receiver box
Route the servo wire
through the chassis
Bundle excess wires
into the receiver box
Antenna Tip
Antenna Tube
Antenna Crimp Nut
Antenna Nut Wrench
Do not overtighten or crush the antenna wire.
Do not kink or cut the black wire, do not bend
or cut the metal tip, and do not bend or cut the
white wire at the end of the metal tip. Do not
shorten the antenna tube.
Antenna
Tube
Antenna
Post
Take care not to crimp
the antenna wire when
inserting the antenna tube
1.
Use the supplied tool
to tighten the crimp
nut on the post.
3.
Antenna
Crimp Nut
Slide the crimp nut
over the antenna tube
onto the post.
2.
E4. Install the lower receiver box
E5. Install wires into the receiver box and plug the wires into the receiver
3x6mm
BCS
CH3
Not Used
CH2
Electronic Speed Control
CH1
Not Used
CH1
Steering Servo
Electronic
Electronic
Speed Control
Speed Control
CH2
CH2
Steering Servo
Steering Servo
CH1
CH1
Install
antenna tip.
4.
Antenna
Tip
