20 • SLASH KIT
D. FRONT MODULE ASSEMBLY
FRONT SUSPENSION BAG
FRONT SUSPENSION BAG
Steering Bellcrank (L&R)
Steering
Bellcrank
(Right)
Steering
Bellcrank
(Left)
Front Skid Plate
Draglink
5x8x0.5 PTFE Washer (4)
3x6x0.5mm MW (4)
5x8x2.5mm PB (4)
3x30mm CS (2)
3x10mm SS (2)
Front Skid Plate
5x8x0.5 PTFE
Washer
5x8x0.5 PTFE
Washer
5x8x2.5mm PB
5x8x2.5mm PB
5x8x2.5mm PB
5x8x2.5mm
PB
3x6x0.5mm
MW
3x6x0.5mm
MW
3x6x0.5mm MW
3x6x0.5mm
MW
3x30mm
CS
Draglink
3x10mm
SS
1.
2.
D8. Assemble the steering bellcranks onto the front skidplate and install onto front bulkhead assembly
4x12mm CCS (2)
D9. Install toe links onto front bulkhead assembly
Note orientation.
The wider end of the
hollow ball should
face the locknut.
Note orientation.
The wider end of the
hollow ball should
face the locknut.
88mm
M3x0.5 NL (4)
M3x0.5 NL
M3x0.5 NL
M3x0.5 NL
M3x0.5 NL
Toe Link (2)
Toe
Link
Toe
Link
3x18mm BCS (4)
3x18mm
BCS
3x18mm
BCS
3x18mm
BCS
Toe Link
Tip: Included 4-way
wrench can be used
to install 3x10mm SS
ACCESSORY
Aluminum Accessory
Bellcrank Assemblies
(various colors; see
included parts list)
3.
4x12mm CCS
Note: If you are using the provided tools for kit assembly,
install the toe links and M3x0.5 NL (from D9) during this step
to allow room for tightening the nuts with the 4-way wrench.
